BIS-HY Gen 2 Hybrid Injection Adhesive

Sesto FastenersSKU: BIS-HY280 Gen 2

Size: 280ml

Description

Downloads

TDS 2018.1: Threaded Rod and Rebar

TDS 2019.1: Post Installed Rebar

ETA-19/0131: BIS-HY Gen2 Hybrid

Chem Select Brochure

NCC FAQ

BIS-HY Hybrid Advert

Adhesive Shelf Life

Chemwatch SDS Form A

Chemwatch SDS Form B

BPIR Form

 

We are a wholesaler, therefore we cannot sell directly to the end user. If this applies to you, please see our stockist list below to find a store near you.

Available StockistsPlacemakers icon logoKonnect icon logoCarters icon logo

When it’s CODE PLATINUM it’s Hybrid Gen 2.
Trusted by engineers and architects in New Zealand.
Combining the superior strength of Epoxy with a fast cure Vinylester.
Fire Rating F120 (2 hours) and approved for use in temperatures up to 160°C.
ICCONS BIS-HY is a rapid cure, styrene free, non-sag, extreme performance Hybrid Concrete Injection Adhesive Anchor.
BIS-HY is suitable for Threaded Rod and Rebar in cracked and non-cracked concrete and Australia’s first rapid cure with Seismic C2 approval for threaded rod.
This revolutionary concrete adhesive injection anchor system lends incredible characteristics to almost all adhesive anchor applications in the professional and DIY spaces.

Features
• EXTREME Load Performance
• Fast 30min cure at 20ºC dry concrete
• 100 Year Design Life
• Fast cure characteristics save time and money on the job
• ETA approved for cracked concrete
• Fire resistance approval
• Potable Water approval
• Seismic C1 and C2 approved
• Low VOC for green projects

Applications
• Infrastructure construction (roads, viaducts, sound barriers, crash barriers, harbours, high rise construction, steel construction)
• Production Facilities (installation of cranes, robots, converyor lines etc.)
• Suitable for threaded rod and rebar in cracked and non-cracked concrete

Use Conditions
• Installation in cracked and non-cracked concrete C20/25 to C50/60
• For anchor rods M8 – M30, rebar Ø8 – Ø32mm and threaded sleeves M6 – M20
• Seismic action C2: M12 – M24
• For hammer/air drilled holes
• Installation in dry, wet and flooded holes
• Overhead installation allowed
*See Tech Data Sheets for more information


SESTO is constantly adding new sizes and types of product to it's range. Specific sizes of this product may not be available through our reseller network. Please contact us directly if your search is not successful.

You may also like

Recently viewed